1. Terms & Conds
  2. Login
  3. Recent Orders
  4. Contact Us
  5. Search
  6. SSL

01323 48368901323 483689

Devotedly Discus 32 High Street, Polegate, East Sussex, BN26 6AJ, United Kingdom.

My Cart

Items:  items
Value: 

DD HMA 800

DD HMA 800
DD HMA 800 - view 1DD HMA 800 - view 2DD HMA 800 - view 3DD HMA 800 - view 4DD HMA 800 - view 5

Price: 188.00 (Including VAT at 20%)


  • Opt 1 - SED/PCB/PCB
  • Opt 2 - SED/PCB/CBR

  • 3/8"
  • 1/2"


20" Penteck "slimline" housings and choice of cartridge sets to suit application. 3/8" or 1/2" fittings and tube for quicker flow through ( up to 15 LPM) Can also be plumbed to combi boiler / warm water supply.

See tabs below for full details.

{FAQ}

Two Cartridge Sets - Why?

Option one "DD HMA 800-1" is a 20" sediment filter and 2 x Spectrum PCB-20-CM carbons. The pre filter will remove sediment down to 1 micron and protects the carbon cartridges from blocking or channelling there by lengthening their useful life. The PCB's will remove Chlorine and Chloramine if present along with organically bonded metals. Select this version if you do not have lead water supply pipes. (UK property built pre 1970 may have some lead piping - if unsure select option 2)

Option two "DD HMA 800-2" is a 20" sediment filter, the middle pod houses a Spectrum PCB-20CM and the final pod a 20" Pentek CBR2 carbon. The pre filter will remove sediment down to 1 micron and protects the carbon cartridges from blocking or channelling there by lengthening their useful life. This combination will remove chlorine,chloramines, lead, mercury and various volatile organic compounds (VOC) Select this version if you have lead water supply pipes. A consideration if your property was built before 1970. Please note the CBR consists of 2 x 10" filters with a Penteck "coupler".

++ please note due to PCB being unavailable just now from importer - DD HMA 200 and DD HMA 800 are shipping with a Chlorplus cartridge in place of the PCB - this is a slightly more expensive option but there is no extra charge++

What is in the box?

You will receive your DD HMA 800 filter "ready to go." The filter is supplied fully assembled. Depending on the size shipping bix available, I may send the inlet / outlet fittings "loose" to prevent damage during transport.

Also supplied as standard is a ¾" BSP to 3/8" fitting which will screw directly onto washing machine type fittings, garden tap etc. A 5 meter length of John Guest 3/8" tubing, a shut off valve, installation instructions and a life time warrantee document.

- Width - 41 cm
- Height - 61 cm includes bracket.
- Depth - 15 cm
- Weight (with cartridges installed) 8.000 kg

How long will the cartridges last?

This depends on the flow though speed of water, and the ppm of the target contaminates.

- Option One @ 7.6 LPM - Chlorine to 380,000 litres, Chloramine to 24,000 litres.
- Option One @ 3.8 LPM - Chlorine to 760,000 litres, Chloramine to 60,000 litres.

- Option Two @ 7.6 LPM - Chlorine to 264,000 litres, Lead to 7,000 litres
- Option Two @ 3.8 LPM - Chlorine to 340,000 litres, Lead to 15,000 litres

With option two, you can of course replace the CBR (lead removal) element when it's due and leave the others to keep costs to a minimum - you do not have to change as a complete set.

The figures are for guidance only and not "absolute"

Please consult Mark Evenden on 01323 483689 if you are unsure which to select or with any questions.

Is there any waste from an HMA filter?

No you can use every drop of water that passes through the filter. If you turn it off for more than a few days it is advisable to flush a few litres through it to remove the older water.

Will my pH be affected?

Most carbon based products will increase the waters pH , however this is usually only temporary and in the main not an issue, flushing 100 / 200 litres of water through the filter will normally see the product water pH in line with the tap water value - as a fishkeeper you should only really be interested at the chemistry of the water when you add it to the tank, not as it is produced from the HMA or RO as you can of course adjust the pH and hardness accordingly. It is not possible to predict "what will happen" as water around the UK varies so much in it's make up.

A responsible fish keeper will always check the pH of water being added to an aquarium / pond with live fish in it

Will the HMA soften my water, remove nitrate or phosphates?

No, HMA will not soften your water, nor will it remove nitrates and phosphates.

How do I plumb it in?

The unit is supplied with a ¾" BSP fitting that allows you to connect it to an outside tap, or washing machine type fitting. Alternately you can buy a self piercing tap for connection to the mains supply. DD HMA filters do not require mains pressure to make them work, so long as you can get water into them, it will filter the water for you. DD HMA units use John Guest fittings.

What flow rate is required?

This will vary with the cartridge combination selected, but 7.6 lpm is the optimum, 15.8 lpm is the maximum with no minimum.

Can I store the filtered water?

You can store water produced so long as it is in a container that is food grade plastic, or a glass tank etc. Always aerate stored water before use. Another way many people now use HMA is to remove a percentage of water from their aquarium, and drip new water directly back into it over the course of a couple of hours.

So, how will an HMA filter improve my fish's health?

Chlorine, Chloramine and dissolved metals are poisonous to fish, and will kill the bacteria in a biological filter, so removing chlorine is essential. Heavy, and organically bound metals in our tap water could over a period of time attack the fishes central nervous system, causing it stress and any manor of related health issues. HMA removes these substances. Fish living in HMA prepared water look healthy, far less susceptible to stress, are active and will display their natural colouration fully.

{Installation}

Thank you for buying one of our filters. Please retain this document as your proof of purchase.

serial number (unique ID entered here)

Installation - Please note that to prevent damage during shipping the inlet and outlet fittings are supplied loose - you will need a 22mm spanner or socket to install these into the ports. Pinch tight is fine, do not over tighten or the fitting may break or the thread may be damaged.

The unit is provided with a BSP to Plain fitting this will fit most washing machine type fitting or outside taps. Select your water source and run a length of tube to the inlet side to the HMA filter. Cut another length and connect it to the outlet and place the free end into the vessel you are using to collect the water.

A John Guest in line valve is provided, fit this on the outlet side of the filter. It must be either in the "ON" or "OFF" position, do not use it to regulate the water flow as it is not designed for this and will fail.


- When you first run water through the filter check for leeks.
- The max flow rate is 15.6 litres a minute, the optimum is 7.6 lpm, and there is no minimum. If you find the flow excessive, adjust the input water source to achieve the flow you require.
- When not in use turn off all taps to relieve pressure on the HMA
- When using after a lay off, please run a few litres to waste to flush the HMA
- The filter removes chlorine, chloramine, various organics and heavy metals, replace the cartridge set depending on the model purchased.(details provided)

Any questions or problems please ring Mark Evenden 01323 483689


{Mark Says}

Here at Devotedly Discus we first used carbon block filters in 1993 and have done so virtually every day since for our Discus. Over the years there have been a number of improvements to cartridge technology (all the Pentek / Spectrum cartridges are manufactured for drinking water applications and in the case of PCB for renal pre-filtration)
We have built up a working relationship during this time with Fileder Filter Ltd and have full access to their laboratory and technical staff for support and development. So if you have an issue with any Penteck or Spectrum product a solution will not be far away.
The most recent development (August 2014) is the slight distancing from the tried and tested CBR cartridges. Following work and consultation with Fileder it is considered not necessary to install a CBR2 for fish keeping, unless your water company has excessive "free lead" in the water, this is very unlikely although is possible if your property was built pre 1970.
I personally use the PCB elements and have no hesitation in recommending it to keepers of Stendker Discus - if you are unsure, please just call me (Mark Evenden) 01323 483689 and I will advise what I think is best for you - water differs hugely around the UK but with in-excess of 20 year's experience supplying and more importantly, using these products we are confident of providing you with a solution.

The CBR2 is a very old friend of Devotedly Discus and of course is still available to those that need it, and to those who simply want to use it.

Providing your Discus with clean water has never been easier or more cost effective than it is now, and if you have clean water, good food and good fish, problems are very few and far between indeed.


{Pre Heated}


{Delivery}
Can be collected in store,

£10.30 - Courier to most UK mainland postcodes.

Isle of White, Isle of Man,Northern Ireland, Scottish Islands and Highlands by Royal Mail (quotation)

Recently Viewed