Show Store Sections
Home HMA / RO / Resin Reverse Osmosis Filtration Booster Pumps DD Reverse Osmosis Booster pump. 50 / 75 usgpd.
Flow Rate (open flow): 1.2lts/minPressure: 125 PSI (9 BAR)Voltage: 24V
This pump is only suitable for membranes of 50-90 USG due to the flow rate of the pump and depending on the efficiency of the membrane/water temperature.CALCULATION1.2 lts/min = 1728 lt/day = 455 USG/dayFlow rate must account for both collected and rejected water volumes through the RO unit. - If 4:1 reject rate = 455/5 = 91 USG - If 5:1 reject rate = 455/6 = 76 USG - We recommend that the pump is not used with any membrane over 100 USG/day as it will reduce the flow rate to the RO and will reduce the efficiency.The pressure of 125PSI is the maximum pressure that the pump can produce when restricted however the larger the membrane the easier the water will flow and the less pressure will be produced.
NEVER DEAD HEAD THE PUMP FOR ANY TIME AGAINST A CLOSED SOLENOID OR CLOSED SHUT OFF VALVE AS THIS WILL DAMAGE THE DIAPHRAGM. IF THIS DOES HAPPEN, THEN A REPLACEMENT HEAD IS AVAILABLE.
User Manual ......