The DD HMA 2000 tap water filter is a TWIN 10" large diameter pod unit and is available with either 1/2" John Guest push fit fittings or garden hose fittings
"Massive Chlorine removal" **@ 2mg/l to 950,000 litres, ***@ 0.02mg/l to 8,312,500 litres
Suitable for aquarists requiring very large amounts of water, for constant feed drip and drain systems. Fish houses / cold water / Koi ponds etc
Fitted with a large diameter 1 micron Spectrum sediment filter and a Spectrum large diameter PFBC carbon block filter.
This configuration will also remove CHLORAMINE if present to 50,000 litres *@ 3mg/l making cartridge change out rare for most fish keepers.
Faster flow rate compared to standard cartridges - Optimal flow rate is 7.6 lpm.If you experience a drop off in flow through the filter before any of the limits are reached, change the sediment element.
Available with ½" John Guest fittings - this version is supplied with cartridges fitted, 4m of John Guest tube, housing wench, "on-off" valve, ¾" BSP water supply fitting, a user manual and wrench for cartridge change outs
Also available to use with "garden hose" - please note this version is supplied with cartridges fitted, and with male inlet and outlet fittings, a user manual and wrench for cartridge change outs - not supplied with any hose, hose connectors, or on-off valve.
Alternately, the inlet and outlet ports are ¾" BSP female threads so can be hard plumbed if that is preferred.
*Chloramine capacity using 3mg/l free available chloramine at 0.5mg/l breakthrough
**Chlorine capacity using 2mg/l free available chlorine at 0.5mg/l breakthrough
***Calculated chlorine capacity using 0.2mg/l free available chlorine at 0.05mg/l breakthroughClick here for PFBC specification PDF
